KDT
Control System for Cargo platforms, Domestic and Handicapped Lifts
Control system for disabled platform lift, domestic lifts (SIRIUS) and freight (CARGO), formed by one single compact controller especially designed for these applications. With its specialized design, a minimum set of adjustments and modular pre-installation, the KDT system can be easily mounted under any circumstances.
Modules diagram
1 Control Panel
2 KD Controller (includes interface)
3 Expansion I / O (PEK)
4 Flat Cable
5 Cabin (Pluggable Installation)
6 Inspection Box
7 Distributor Board (TBK)
8 Car operating panel
9 Push-Buttons
10 Shaft (Modular Installation)
11 Section Cables w/connectors
12 KDT I/O set- sensor (WFS)
13 Bus I/O set
14 Displays (DMR, LCD)
15 Alarm Equipment (SAR)
| Module | Description |
| (2) KDT | KDT central controller with control program that centralizes the entire operation of the elevator (receiving calls, cabin movement, door control, etc.). |
| (3) PEK | I/O expansion board |
| (7) TBK | Connections Distribution Board – to the flat cable. Facilitates the connection of all elements of the cabin. |
| (12) CMA | KDT I/O set-sensor to connect the alarm equipment in the cabin and displays in cabin or floor. |
| (15) SAR | Alarm module. Allows for the alarm call (cabin, ceiling and the wall). Includes voice synthesis for messages and event log lift for tele-surveillance. |
| (14) DMR LCD | Graphic Displays connected to I/O Set Bus, with information on position, direction, status. |
Sirius
Functional Specifications SIRIUS (Handicaped / Domestic Lift)
| Modules | Normative | |
| Universal Control | ||
| Available Control Panels for hydraulic and electric motors with frequency control | ||
| Safety Series at 12 VDC and isolation distances normalized to 48 VAC / VDC | KDT, PEK | EN 81-41 |
| Self-pass contactor and strict compliance to the failure analysis | KDT | EN 81-41 |
| Adjustable run time from 45 up to 180 seconds | KDT | EN 81-41 |
| Inhibition by over-temperature, finishing movement in progress | KDT, PEK | EN 81-41 |
| Manual door control, sensitive restricted, automatic door and door opening devices | KDT | EN 81-41 |
| Operation inspection from inside cabin | KDT, PEK | EN 81-41 |
| Automatic leveling with open door on unlocking zone | KDT | EN 81-41 |
| Stop Precision +/- 10mm | KDT | EN 81-41 |
| Load Control | KDT, PEK | EN 81-41 |
| Automatic return to a plant, adjustable from 30 to 300 seconds | KDT | |
| Permanent press of Push-Button in cabin and automatic exterior | KDT | EN 81-41 |
| Inability to initiate a call from the outside, if the platform is not located in a plant | KDT | EN 81-41 |
| Emergency operation selectable at any lower level | KDT | |
| Alarm call from inside cabin, cabin or ceiling, in case of entrapment, by analog phone line | IOset, SAR | EN 81-41 |
| Selection of doors with electrical or mechanical cam (adjustment) | KDT | |
| Series and current status information of the elevator, using LED’s | KDT | |
| Modular, Pluggable, Shaft Wiring | ||
| Pluggable Cabin Wiring | TBK | |
| Standard radio emission and immunity | All | EN 12015 EN 12016 |
Cargo
Functional Specifications CARGO (Cargo Platforms)
| Modules | Normative | |
| Universal Control | ||
| Available Control Panels for hydraulic and electric motors with frequency control | ||
| Safety Series at 12 VDC and isolation distances normalized to 48 VAC / VDC | KDT | |
| Self-pass contactor and strict compliance to the failure analysis | KDT | |
| Adjustable run time from 45 up to 180 seconds | KDT | |
| Automatic return to a plant, adjustable from 30 to 300 seconds | KDT | |
| Manual door control, sensitive restricted, automatic door and door opening devices | KDT | |
| Automatic leveling with open door on unlocking zone (Locking system) | KDT | |
| Stop Precision +/- 10mm | KDT | |
| Locking Control w/ Mechanical Devices | KDT, PEK | |
| Plant automatic Push-Button function | KDT | |
| Selection of doors with electrical or mechanical cam (adjustment) | KDT | |
| Series and current status information of the elevator, using LED’s | KDT | |
| Modular, Pluggable, Shaft Wiring | ||
| Pluggable Cabin Wiring | ||
| Standard radio emission and immunity | All | EN 12015 EN 12016 |
Configurations
Configurations
In response to the needs and end use, our KDT system has several configurations:
|
Home Lift |
Platforms |
||
|
SIRIUS |
CARGO |
||
|
Electric |
2V |
||
|
VF |
x |
x |
|
|
Hydraulic |
Direct |
x |
x |
|
E.T |
x |
Pre-Wiring
Pre-Wiring
It is a wiring set for lifting platforms, disabled and / or domestic elevators(SIRIUS) and freight (CARGO) with a reduced time of assembly and start-up.
| Cabin |
| Flat Cable cut to order and finished with connectors on both ends |
| Cables for devices from the ceiling, and finished prefixed lengths w/ edge connectors |
| Completely wired Inspection box |
| Interconnection with Push-Buttons using Flat Cable (for Sirius) |
| All equipment quality tested, automatically |
| Shaft |
| Interconnection between floors with flat cable ( communications with modules and security series) in sections of fixed length |
| Coded jacks on the same floor module |
| All equipment quality tested, automatically |
